Features: New type, very fast and strong machine.
Sammys the excess water out of wet blue or drum-dyed woolen skins and stretches the skins. It prevents the skin from being decolored and provides uniform drying.
It also sammys and sets out the skins (only from drum dyed) for Nappa.

Technical data：

Features: New type, very fast and strong machine
Sammys the excess water out of wet blue or drum-dyed woolen skins and stretches the skins. It prevents the skin from being decolored and provides uniform drying.
It also sammys and sets out the skins (only from drum dyed) for Nappa.

Technical data：

TIANJIN GIANTEY MACHINERY CO., LTD. makes this machine for a long time and has rich experience in this field. The Working principle OF HYDRO-EXTRACTOR.The spin-drier is working on the principle of centrifugal motion. The inner cylinder will rotate at a very high speed driven by the motor, the water inside the clothes will leave the clothes in a centrifugal way at high speed, and then spines out of the cylinder, thus the water inside will be removed.

Internal cylinder material Stainless steel.
Structure of the machine: The frequency conversion off-center dehydrator has used the advanced sliding bearing part (1) the complete machine supporting in three sliding bearing place, and uses the elastic coupling, when dehydration, it can vibrate most greatly by the calcinate the alleviation function which maximum limit, not balanced causes because of the laying aside, causes the rotation to be steadier.

The enclosure and top cover are made of the steel plate and the bottom plate is iron- steel, the discharging tube is fitted under the bottom plate. The supporting stand and pedestal are all made of iron steel.

The main shaft is made of high-quality steel with two bearings. The bottom is supported with a thrust ball bearing to reduce abrasion and save energy.
Rotary cylinder is made of stainless steel plate with a buttonhole, the bottom of the cylinder is iron-steel with stainless steel bottom cover. The rotary cylinder is equipped on the cone face on the top of the main shaft to ensure stable rotation. The taper is 1:5.714.
Master control box: In the master control box is loaded with: The frequency conversion velocity modulation controller, cools the air blower, the transformer, the relay, the number obviously timer, electric control parts and so on indicating lamp, uses for to complete electrical machinery’s pro and con idling and the high-speed dehydration, as well as leads the cloth pro and con revolution.

HYDRO-EXTRACTOR used the feedback to apply the brake and to direct current applies the brake (popular name dynamic braking) its characteristic to exempt the replacement brake balloon trouble, reduced the breakdown which received as a result of the mechanical brake system, increased the machine service life.
The frequency changer working instruction is tight.
The frequency changer internal data non-this factory debugs the personnel not to revise if, from the revision, the consequence is proud friendly.
Services when the machine must shut off the buyer power source, must wait the frequency changer to demonstrate that the kneading board finishes attending when has nothing the demonstration, only then starts to overhaul, because the frequency changer was separating the power source instantaneous still to have the high pressure. (about 5 minutes)
When the dehydrator presents the vibration oversized should according to stop the button or on anxiously immediately the button box STOP the button. Causes the dehydrator to stop down, verifies the reason, after the trouble clearing, moves again, under record breakdown reason.
When the frequency changer presents the fail-safe, verifies the reason, after the trouble clearing, according to the master control box in the reset button, under the record breakdown reason.
Because other factors cause the frequency changer to do protect oneself, when has the alarm, the frequency changer will stop any output (i.e. not automatic brake condition) the electrical machinery (escaping water cylinder body) to revolve freely by the very big inertia, this time, by all means, must wait for the electrical machinery (to escape water cylinder body) to stop getting down, according to the breakdown demonstration code, looks up should the breakdown reason, after the trouble clearing, then moves.

Technical data：

TIANJIN GIANTEY MACHINERY CO., LTD. is specialized in the production of the tipping paddle.
The Tipping Paddle GTP-15 is made entirely of stainless steel and specially designed to guarantee resistance to the kind of chemical abrasion which can be caused in the tanning processing workshop.

The drive equipment of the rotating paddle consists of an electric motor and a heavy-duty gearbox. The rotational speed is controlled by the control panel.
The rotating paddle has six blades mounted on the shaft and side plates, all these parts are stainless steel.

The tipping paddle is suspended from two steel columns, at top of which there are supporting shafts. The movement for tipping is carried out by two hydraulic cylinders which are positioned at each side of the tipping paddle and operated by the control panel of the hydraulic unit.

The equipment is fitted with a removable stainless-steel bottom with a completely smooth surface which avoids damaging the skins during the processing. The drainage is done by two remote-controlled hydraulic valves.

Technical data：

Tianjin Giantey Machinery Co., Ltd. has been selling the Turbomixer GTB-165 for many years and cooperated with many foreign companies and domestic manufacturers, it has rich experience in the production of turbo mixers of different kinds in size.

The Turbomixer is an essential piece of equipment in tanneries throughout the world. It is used for wet processing of all types of skins and hides (cattle, pig, goat, lamb, etc.) such as soaking, liming, pickling/tanning, dyeing, and fat-liquoring, etc…as well as for the preservation of green hides and skins by salting or immersion in saline solutions. Drums are also used for producing collagen and gelatin.

The cylindrical drum is manufactured entirely in stainless steel (Aisi 316L), which has been specially designed to withstand chemical corrosion which tanning processes can cause. The interior of the drum is fitted with specially designed and angled blades that ensure uniform movement with a smooth, continuous action.

The stainless steel drum is mounted on a metal frame fitted with the front and rear rotating gears, the recycling system, and part of the main drive equipment, the whole thus forming an integral body.

Loading is easily and quickly effected through the drum front feeder mouth either manually or using pneumatic transport systems. (A loading ramp can also be included as an OPTION). Unloading is effected by running the drum in reserve which enables the drum to be either totally or partially emptied in a short space of time. The contents can be observed throughout the process through the open mouth of the mixer.

Water consumption can be reduced by up to 60% and the saving on chemical products can be up to 30%. The processing times can also be considerably shortened in comparison with other traditional systems.

Technical data：