Can cut mink and other tube skins into strips

Technical Data:

A fur tube negative pressure formation machine with high speed and low labor intensity. It includes a bellows, a skin-turning pipe, and a sieve plate is arranged in bellows. When in use, put the knife-edge of the tubular fur on the air inlet end of the leather turning pipe and manually pinch it by hand, start the air compressor, and draw the other end of the fur barrel into the leather turning pipe by the wind to achieve turning. The advantage is that the speed is fast and the labor intensity is low.

Technical Data:

After oil tanning, the oil is slowly oxidized under certain temperature and humidity conditions, and the oxidized polymer wraps the collagen fibers to make the collagen fibers movable and hydrophobic. The finished leather is light yellow, soft, loose foam, napped on both sides, fine and silky down hair, good extensibility, water absorption, moisture permeability, washing resistance, and does not change shape after drying.

Technical Data:

The ironing roller is made of steel, mirror polished, the heating temperature is uniform, the working temperature can be set freely, and the temperature is automatically controlled. The wrinkled leather can be ironed to make the surface of the leather smooth and brighter. Suitable for belts, purses, wallets, and footwear.

Technical Data:

It is suitable for small-sized skins such as mink and rabbit skins. The spiral knife has the characteristics of energy-saving and high efficiency, which can effectively improve the surface quality of the skins and reduce blade consumption.

Technical data：

Through-type ironing machine GTI-70-80-90-125 is a large-scale double-face and fur processing equipment, it is GIANTEY-specially designed for wool-on lambskin processing, it combines the advantages of reciprocating-type and through-type? from the two kinds of ironing equipment, our any existing ironing machine can not be compared with it, both speed and quality. A variety of large wool-on lambskin and fur can be continuously ironed by this machine, with both automatic or manual operation. The feed speed is adjusted by the controlled hydraulic motor, which is convenient and reliable.

The machine is equipped with a special conveyor belt and triangular support mechanism, conveyor belt is made of advanced and anti-high temperature chemical fiber, it is woven of barrel-like structure, ironed wool-on skin through the ironing roller is automatically sent out. According to the length of sheepskin hair size, operator can adjust the conveyor belt to the best rolling angle and right pressure, to ensure that the ironing effect to achieve the best. The ironing cylinder is made of anti-corrosive materials and contains 36 high-quality armored heat-resistant heating tubes, the operating temperature is automatically controlled by the electronic temperature control meter, so that the hot ironing cylinder is always kept at the right level of the working temperature。

GTI type series of auto- ironing machine by manual operation can also be automatically changed to through -type, it is well-designed for fast-working, high efficiency and reliable safety, it is the first choice among ironing machines for large and medium-sized fur and double-face processing enterprises.

Technical data：

Tianjin Giantey Machinery Co., Ltd. has produced the traditional machine GRS-125, CYLINDER WET SHEARING MACHINE, for many years, this machine is well used in the lambskin production processing, especially in the production of double-face. It cuts the wool at the very beginning for the skins with short wool, it is well used for raw lambskins, wet or dry.

This working cylinder has four blades, working for a long-time term, the blade is for shearing and strong for usage, it is free of maintenance normally. This machine could shear all raw and wet lambskins, with the perfect shearing result being uniform, even, defect-free, automatic, maintaining-nearly-free, and long-life. All the material contacting with water or chemical has well proceeded with corruption-prevent measures.

Technical data:

Technical data：

Wet stretching machine, typed as GWS-1 is well designed for stretching the wet mink skin, it could make the skin bigger in size and soft in quality.

The machine is designed with gears driving style and equipped with rubber cylinders, and the stretched skin is?well?enlarged and stretched and becomes even and has no wrinkles. The machine has an overload protection device and could work safely and continuously.

Technical data：

TIANJIN GIANTEY MACHINERY CO., LTD. Has been making this kind of plucking machine GP-7 for many years and it is suitable for plucking open and closed dressed minks. The mink skins are pressed mechanically to the rotating plucking cylinder by means of a foot pedal. The plucking cylinder is equipped with 8 inclined rubber ledges, which are held by a squeezing device, thus enabling an easy exchange. The rotating speed of the plucking cylinder is continuously adjustable. Loose bristly hair is sucked off by a built-in exhaustor.

Technical data：